Forwarding Protocols • BGP VPLS with route reflector
Good day to all, i want to migrate our small production MPLS/VPLS setup to v7 but before we do that we want to lab it first with GNS3 but I hit a snag, all bgp session is up and VPLS interface is all...
View ArticleForwarding Protocols • Re: No neighbors with OSPF
Please check if you are blocking OSPF incorporate this rule with your existing firewallCode: ip firewall filter add action=accept chain=input protocol=ospfStatistics: Posted by loloski — Thu Apr 04,...
View ArticleGeneral • Re: WiFi Isolation Using VLANs
Additionally, I've noticed in some tutorials that firewalls are used to block access between VLANs. If I'm required to use a firewall, what's the purpose of using VLANs?This is a common knowledge, the...
View ArticleBeginner Basics • Re: wifi24 in italics, dhcp server gives invalid..
What are these two entries?/interface bridge port add bridge=bridge comment=defconf interface=*6/interface bridge port add bridge=bridge comment=defconf disabled=yes interface=*7Does log have anything...
View ArticleAnnouncements • Re: v7.14.2 [stable] is released!
I have a tricky problem that came out during MPLS debugging:Supposed to have three routers, Router A - CCR2004, Router B - CCR2004, and Router C - CCR2216. Routers A and B are linked with AirFiber 24...
View ArticleGeneral • Re: xz Backdoor CVE-2024-3094
Well I hope everyone was inspired and did a double check on all Firewall rules, to make sure nothing can access the router from any untrusted network. If no packet can reach the router, even yet...
View ArticleClik here to view.
General • Re: Connectivity to customers mikrotiks via Wireguard. Good idea?
Attention to detail my friend!SPINE1. You need to add ether 2,3,4 to the bridge ports! ( assuming they are part of your LAN as you have no other ports or addressess delineated )2. If the Spine is...
View ArticleBeginner Basics • RB5009UPr+S+IN and CSS326-24G-2S+RM
I want to rebuild my network and replace some old hardware. Want to ask for any advice and thoughts about this setup.Current setup:ONT (fiber to ether) from local Internet provider connected to old...
View ArticleGeneral • IP address invalid
Hello everyone,I'm trying to register a second PPPoE client interface for a FTTO link (the first one is for FTTH and is working correctly).When I create the address for the PPPoE interface, it's says...
View ArticleBeginner Basics • Re: Turn off Neighbor discovery
If you want to check at client side, filtering rules works fine. Use this tool:MikroTik Neighbor Discovery Protocol Toolshttps://github.com/xmegz/MndpTrayStatistics: Posted by padar — Thu Apr 04, 2024...
View ArticleClik here to view.
Wireless Networking • Re: WiFi Home Configuration Suggestions
Ok!I took one cAP ax and configured it last night, so I have still nothing particular to share with you about the range etc...except the fact that placed near the old AP (they're still both powered...
View ArticleAnnouncements • v6.49.14 [stable] is released!
RouterOS version 6.49.14 has been released in the "v6 stable" channel!Before an upgrade:1) Remember to make backup/export files before an upgrade and save them on another storage device;2) Make sure...
View ArticleAnnouncements • Re: v6.49.13 [stable] is released!
New version v6.49.14 has been released:viewtopic.php?t=206444Statistics: Posted by EdPa — Thu Apr 04, 2024 11:57 am
View ArticleAnnouncements • Re: v6.49.14 [stable] is released!
Nice to see New Updated in V6Statistics: Posted by nithinkumar2000 — Thu Apr 04, 2024 12:05 pm
View ArticleGeneral • Re: IP address invalid
The network and address should be different for a /32.for /32 Address is local ip address, network is remote end ip address.Statistics: Posted by rplant — Thu Apr 04, 2024 12:10 pm
View ArticleGeneral • Re: VRRP access network also from slave?
Hi,Please show us your "/interface/export" and "/ip/export" outputs of both VRRP master and backup devices.Statistics: Posted by raimondsp — Thu Apr 04, 2024 12:20 pm
View ArticleGeneral • Re: Webfig Enhancement
I find it infuriating that everytime I open Webfig on any device, I have the # column for firewall rules filling half my screen (for max 2 chars), then I have Comments so small I get about 10 chars,...
View ArticleGeneral • Re: HW Offloading
L3HW offloading only works between if all routes reside on same bridge. It seems your WAN is on off-bridge interface sfp-sfpplus1 .This requirement applies only to VLAN. If the WAN port does not need...
View ArticleRouterBOARD hardware • Re: Outdoor 5G?
I have actually had a WAP AC LTE6 for a long time, with WIFI (to some guest harbours) preferred over 4G. But it haven't worked great. Finally had time to look at it yesterday, turned out that the...
View ArticleGeneral • Routing DNS queries through Wireguard tunnel
Hi all,I need some help with something that I want to achieve.I have local pi-hole for dns queries, but in order to achieve redundancy of the dns server I have created one in Google Cloud which I'm...
View Article