Hi,
im running a RB5009 with 2 connected CAP ACs.
the CAPs are connected to Port 7+8 on the RB5009.
Im running 3 VLANS:Bridge BR-MAIN is setup as following (relevant AP config only)
The Caps are running on VLAN50:Caps Man config:
Each VLAN has a DHCP Server running, handing out IPs:The CAPs are operating in manager forwarding mode.
Clients are getting their IP fine and Caps are reachable via L2/L3 fine.
Only thing which is not working is DNS. I cannot upgrade CAPs as they cannot resolve DNS names. What am I doing wrong?
Forgot to add CAP config.
im running a RB5009 with 2 connected CAP ACs.
the CAPs are connected to Port 7+8 on the RB5009.
Im running 3 VLANS:
Code:
/interface vlanadd interface=BR-MAIN name="VLAN10 - Wifi" vlan-id=10add interface=BR-MAIN name="VLAN20 - IoT" vlan-id=20add interface=BR-MAIN name="VLAN50 - LAN" vlan-id=50
Code:
/interface bridgeadd admin-mac=REDACTED auto-mac=no name=BR-MAIN port-cost-mode=short protocol-mode=none vlan-filtering=yes/interface bridge portadd bridge=BR-MAIN comment="AP1 (Downstairs)" frame-types=admit-only-vlan-tagged interface="ether7 - AP1" internal-path-cost=10 path-cost=10add bridge=BR-MAIN comment="AP2 (Upstairs)" frame-types=admit-only-vlan-tagged interface="ether8 - AP2" internal-path-cost=10 path-cost=10
Code:
/interface bridge vlanadd bridge=BR-MAIN comment=LAN tagged="BR-MAIN,ether7 - AP1,ether8 - AP2" vlan-ids=50
Code:
/caps-man configurationadd channel.band=5ghz-a/n/ac .control-channel-width=20mhz .extension-channel=\ disabled .skip-dfs-channels=yes .tx-power=20 country=austria \ datapath.bridge=BR-MAIN .client-to-client-forwarding=yes .vlan-id=10 \ .vlan-mode=use-tag installation=indoor mode=ap name=Owcahome rates.basic=\ 12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps .supported=\ 12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps security.authentication-types=\ wpa2-psk .encryption=aes-ccm .group-encryption=aes-ccm .group-key-update=\ 10m ssid=Owcahomeadd channel.band=2ghz-g/n .control-channel-width=20mhz .extension-channel=\ disabled .frequency=2412,2437,2462 .skip-dfs-channels=no .tx-power=10 \ country=austria datapath.bridge=BR-MAIN .vlan-id=20 .vlan-mode=use-tag \ installation=indoor mode=ap name=IoT rates.basic=\ 12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps .supported=\ 12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps security.authentication-types=\ wpa2-psk .encryption=aes-ccm .group-encryption=aes-ccm .group-key-update=\ 10m ssid=IoT
Code:
/ip dhcp-serveradd address-pool=POOL_IOT interface="VLAN20 - IoT" lease-time=4w2d name=DHCP-IOTadd address-pool=POOL_WIFI interface="VLAN10 - Wifi" lease-time=1w3d name=DHCP-WIFIadd address-pool=POOL_LAN interface="VLAN50 - LAN" lease-time=14w2d name=DHCP-LAN
Clients are getting their IP fine and Caps are reachable via L2/L3 fine.
Only thing which is not working is DNS. I cannot upgrade CAPs as they cannot resolve DNS names. What am I doing wrong?
Forgot to add CAP config.
Code:
/interface bridgeadd admin-mac=REDACTED auto-mac=no ingress-filtering=no name=BR-MAIN \ protocol-mode=none vlan-filtering=yes/interface ethernetset [ find default-name=ether1 ] name="ether1 - Router"set [ find default-name=ether2 ] name="ether2 - Printer" poe-out=off/interface vlanadd interface=BR-MAIN name="VLAN50 - LAN" vlan-id=50/interface bridge portadd bridge=BR-MAIN frame-types=admit-only-vlan-tagged ingress-filtering=no \ interface="ether1 - Router"add bridge=BR-MAIN frame-types=admit-only-untagged-and-priority-tagged \ interface="ether2 - Printer" pvid=50/interface bridge vlanadd bridge=BR-MAIN tagged="BR-MAIN,ether1 - Router" vlan-ids=50/interface wireless capset bridge=BR-MAIN certificate=CAP-18FD74C22E38 discovery-interfaces=\ "VLAN50 - LAN" enabled=yes interfaces=wlan1,wlan2 lock-to-caps-man=yes/ip dhcp-clientadd interface="VLAN50 - LAN"/system identityset name=AP1
Statistics: Posted by h1ghrise — Tue Mar 12, 2024 9:49 pm