General • Re: Wiregard to redundant routers
Not quite sure but you should be able to have two wireguard tunnels up at all times.Home router to ISP1 on one wireguard interface and Home router to ISP2 on a second wireguard interface.Just not sure...
View ArticleThe User Manager • Re: The User Manager I can't install.
Well, it's fixed, you're right, the problem was that winbox, VERSION 4.0BETA doesn't let you drag to root, it has problems, so since I have routerOS 7.17 it doesn't let you use winbox 3.41, what I did...
View ArticleAnnouncements • Re: 📣 WinBox 4 is here 📣
I was hoping in the /ip/firewall/connections section of the new Winbox you could also filter by Ports..I posted this same thing several months ago (viewtopic.php?p=1106664#p1106664) and got no...
View ArticleBeginner Basics • Management access to PtP link
Hi. Confession - I'm no network expert but can normally get things working. Rather than cobble something to do what I want I'd like to understand standard or good practice for this sort of...
View ArticleWireless Networking • Best Way to Wireless Bridge 1st and 3rd Floor in an old...
Hey everyone,I have two MikroTik wAP ax devices, and I need to connect the 1st and 3rd floors in an old apartment building with thick floors and walls. Unfortunately, there’s no direct line of...
View ArticleWireless Networking • Re: Best Way to Wireless Bridge 1st and 3rd Floor in an...
What did Scotty say to Captain Kirk?Use a cable/fibre.Statistics: Posted by sid5632 — Sat Jan 25, 2025 4:59 pm
View ArticleGeneral • Re: CoreTransit /29 Routable IP L2TP Service
Basically whatever is coming from 192.168.88.0/24 goes out the default route. (the spectrum main dhcp'd ip)Anything that comes over the l2tp connection say 216.146.17.128/29 goes out of the route of...
View ArticleGeneral • Invalid ICMPv6 Neighbor Solicitation Packet emitted by Loopback...
I have a firewall INPUT rule that fires every now and then.Code: input: in:lo out:(unknown 0), connection-state:invalid proto ICMP (type 137, code 0), fe80::3:510d:9220->fe80::3:510d:9220The ipv6...
View ArticleScripting • Re: 🧐 example of automating VLAN...
Well done Amm0.Statistics: Posted by BartoszP — Sat Jan 25, 2025 5:18 pm
View ArticleAnnouncements • Re: NEW FEATURE: Back to Home VPN
Interesting as I wouldnt have thought of that but since the router is in some sense a client here as well it kinda works.Just wondering if monkeying with the MTU for one device connection will effect...
View ArticleBeginner Basics • Question about Firewall Rules for Inter-VLAN Communication
Hello all, I am still very new to a lot of networking concepts. I am confused about using firewall rules for inter-VLAN communication between specific IPs.I have been watching lots of videos on...
View ArticleGeneral • Re: Hap AX3 as CAPsMan controller and Hap Ac as a Cap issue
Thank you all guys for the replies!Statistics: Posted by DrCure — Sat Jan 25, 2025 8:47 pm
View ArticleGeneral • Re: Weird roaming between access points after implementing VLANs
"FT Enabled" and "FT Over DS" seem to be still enabled, but somehow not effective at APs level.This is expected and normal. All the intelligence is in the CAPsMAN device, i.e. the 5009 in your...
View ArticleWireless Networking • Dual-band wireless repeater
I have a normal ap-station setup, but sometimes I want to extend the signal. I understand that if i were to put a repeater and use the same band in the repeater for receiving and transmitting, I would...
View ArticleGeneral • ISP ideas?
Hello,I have a question, we are talking about a small internet service provider that has about 800-1200 users and one or two cloud core routers.The question is, how to manage clients, IP addressing,...
View ArticleGeneral • Re: ISP ideas?
You might want to take a look at PPPoE to manage to manage clients connection / IP addressing , etc..https://help.mikrotik.com/docs/spaces/R ... E-OverviewIt's easy to setup and deploy...Statistics:...
View ArticleSwOS • Packet loss on mirror port on CRS326-24G-2S+ Rev. 2
I am trying to setup Securityonion to make a SOC in my home network. I use a Topton N100 firewall PC with 4x 2.5 gbit/s Intel i226-v network cards for Securityonion. The management interface is...
View ArticleGeneral • Re: DNS Cahe Full/adlist read: max cache size reached
Maybe this information will be interesting for anyone. I had same issue. Memory used by dns cache was bigger and bigger every minute. There was only 80 entries in cache but memory used by cache could...
View ArticleClik here to view.
Beginner Basics • Re: Buyer recommendations for noob in a hurry
No, devil's way would be start messing with CAPsMAN +1 It still eludes me how you can be so skilled using VLAN (even spotting errors simply reading snippets of code) but struggle with...
View ArticleGeneral • Re: Quick take: Cloudfare, Quad9, Google, NextDNS, Adguard or Pihole?
It would be enough for all users to agree and boycott the products in the EXCESSIVE advertising banners,sending protest emails to the companies in question, and they would stop advertising in that...
View Article