RouterBOARD hardware • Re: hap ac3 led lights explained
Figuring out what those LED lights mean can be a bit of a puzzle. I had a similar issue with a gadget a while back. It had all these blinking lights, and I was clueless. What worked for me was finding...
View ArticleBeginner Basics • Re: bandwidth problem with many router
The HEX is not capable of accommodating a 1gig ISP connection.Suggest you look at the hapax3 ( wifi router ) or RB5009 router.Check the specs --> TEST Results for 512 bytes packet size and 25...
View ArticleGeneral • HIGH CPU 100 - CRS354-48P-4S+2Q
Hi,our switch constantly has 100 percent CPU load, why?Code: # 2024-01-22 13:48:17 by RouterOS 7.11.2# model = CRS354-48P-4S+2Q+/interface bridgeadd name=BRIDGE protocol-mode=none...
View ArticleRouterBOARD hardware • Re: RBM33G mPCIe#1 not detecting wireless module
Hi,could it be that board at some point has received more voltage than rated 11-28 V ? (For example used in automotive, where at car startup it got voltage spike)Please check if there is stable 3v3 on...
View ArticleBeginner Basics • Dual Wan, Dual LAN, No LB or Fail Over on 7.13.2
Sorry for posting a common question. I searched the forums last night, googled for a bit and even watched a few YT videos but nothing seemed to work in my test lab. I'm using a newer rOS than the...
View ArticleBeginner Basics • Re: VLAN can't ping gateway
I would like to get it working this way if I can, mainly just to work out the problem.Statistics: Posted by charley — Tue Jan 23, 2024 12:51 am
View ArticleWireless Networking • Re: Point-to-Multipoint with 60G/5G failover
Ended up switching off the 60G radio. Simply couldn't find a firmware version that was stable.Did you try RouterOS v7.11 or higher? According to the changelog there were some changes in v7.11 to...
View ArticleVirtualization • Trunking VLAN with Meraki cannot reach other vlan
Hello there, I configured VLANs with Mikrotik CRS326-24G-2S+ and Meraki MX64. Here, I set up Meraki as the router, which also creates VLANs. Meanwhile, I use Mikrotik as a distribution switch. The...
View ArticleBeginner Basics • Re: ARP publish
Pelo que eu estava lendo na wiki Manual:IP/ARP, está função e acionada quando o roteador assume a responsabilidade de responder as requisições, como se fosse um proxy-local. Não achei resposta do...
View ArticleBeginner Basics • Script for router with VLANs is not quite working
I'm looking for help identifying fundamental problems in my VLAN-based script configuration of a router. If there are any script jockeys out there, I'd appreciate an evaluation with explanations. My...
View ArticleForwarding Protocols • Re: BGP Issue
This might sound silly, but do you have DNS servers set via the IP>DNS menu?Statistics: Posted by nellicus — Tue Jan 23, 2024 3:09 am
View ArticleGeneral • Re: Failed Firmware Update - No Connection on Mikrotik HAP AC
viewtopic.php?p=1050875#p1050875Statistics: Posted by anav — Tue Jan 23, 2024 3:27 am
View ArticleRouterOS beta • Re: EIGRP
I do believe IS-IS was recently implemented in beta.. hopefully EIGRP is next!!!!Statistics: Posted by Regctx — Tue Jan 23, 2024 3:44 am
View ArticleBeginner Basics • Re: Dual Wan, Dual LAN, No LB or Fail Over on 7.13.2
Dont understand why you have two bridges. Its best in most cases to use a one bridge approach, unless its got two separate switch chips in the router.If you have dynamic WANIPs, the hardest part is...
View ArticleVirtualization • Re: Trunking VLAN with Meraki cannot reach other vlan
Well if the MT is solely acting as a switch it should have nothing to do with L3 access.Statistics: Posted by anav — Tue Jan 23, 2024 4:20 am
View ArticleScripting • Re: Useful scripts
Method of working with regional ip address databases without using a firewall address list - does not take away the performance of executing rules using lists.Code: :global ipLocation...
View ArticleRouterBOARD hardware • Re: LTE sensitivity
Well, never had any problem with powering routers directly from car outlet. While spikes can happen it's rare and as your link said happens when there is battery disconnection while alternator is...
View ArticleGeneral • Re: Kill switch set-up - Wireguard (Surfshark) - ROS 7.8
Start your own thread, provide network diagram, list the user requirements ( what user and devices you ahve and what traffic they need) and provide your current config/export file=anynameyouwish (...
View ArticleGeneral • Re: /tool/dns-update to bind server
I solved the authentication issue (I was using a hmac-sha256 key, not hmac-md5) and I am now able to add resource records into my DNS server from my MikroTik router. But I cannot find a way to remove...
View ArticleBeginner Basics • Re: Cant get into my Mikrotik
If the device has been reset, there is no need to netinstall. Like the other poster above said, port1 is for the internet cable, you can connect from ports 2-5. Try it like that, user "admin", no...
View Article