Wireless Networking • HAPac2 - Issues connecting to certain 5Ghz channels
Hi,I've probably done something wrong, but I have a netinstalled HAP ac2 (international non locked version) with wifi-qcom-acCode: /interface wifiset [ find default-name=wifi1 ]...
View ArticleGeneral • Re: NAT Hairpin Configuration Troubles
Ah, thanks so much y'all! Turns out it my issue was the in-interface-list=WAN in the original dst-nat rule. I got a real kick out of Sob's bit there, it's foolproof, you can't mess it up (ok, I know I...
View ArticleClik here to view.
RouterOS beta • Re: In v7.x.x with ipv6 will the hotspot die?
MikroTik IPv6 Hotspot DNS64 & NAT64https://youtu.be/QhL4Io3rh3Y?si=I2hSP85LNJsqKNliStatistics: Posted by abdrzjsy — Fri Jan 19, 2024 9:13 pm
View ArticleClik here to view.
Scripting • Re: (Draft) IPv6 Authentication for Hotspots
MikroTik IPv6 Hotspot DNS64 & NAT64https://youtu.be/QhL4Io3rh3Y?si=I2hSP85LNJsqKNliStatistics: Posted by abdrzjsy — Fri Jan 19, 2024 9:16 pm
View ArticleClik here to view.
General • Mikrotik ipv6 hotspot
MikroTik IPv6 Hotspot DNS64 & NAT64https://youtu.be/QhL4Io3rh3Y?si=I2hSP85LNJsqKNliStatistics: Posted by abdrzjsy — Fri Jan 19, 2024 9:17 pm
View ArticleBeginner Basics • Re: Sharing one physical trunk port with two bridges
Reading someones VLAN design, is always hard for me. Even with a very nice drawing , it helps, but still I didn't grasp it. It is probably me.I give what I understand of VLAN and bridges, but in this...
View ArticleGeneral • Problem in displaying the total amount of download and upload
Hi everyoneI am using OS version 7.13.I have set the user manager and SSH users connect after authentication.But the amount of download and upload traffic is not displayed for each user.Anyone have...
View ArticleWireless Networking • Re: Point-to-Multipoint with 60G/5G failover
Seemed OK on the test bench, although we know test bench != the real world.Yeah, about that.....now it's installed my CubeSA 60Pro ac has rebooted 7 times so far today, max uptime is 33 minutes. It...
View ArticleGeneral • Re: Cant Access my Mikrotik Routerboard
Hello max456, welcome to the forum.Like other technical forums, it is normally expected here that questions come after searching. If I google "Mikrotik Routerboard 750 reset" for example, I find a...
View ArticleGeneral • PPPoE and DHCP servers same ports ?
CCR1036-8G-2S+ SFP+ is Internet (Public/Internet Routable IP) SFP+ 2 and Ports 3 - 8 are PPPoE . All addresses are public / internet routable there is no NAT or Private IP/Networks involved. Every...
View ArticleBeginner Basics • Re: Worth it to change private IP address early in setup...
Still missing something. Following suggestions:Set up eth3 on hap ac lite (g/w router) with DHCP server for 10.10.10.0/24. Added 10.10.10.0/24 to the Address List for eth3. Wired that port directly to...
View ArticleBeginner Basics • two hotspot for two wan
hey there.i have two wan goes through port 1 for wan 1 and port 2 for wan 2i want to creat two hotspot one for isp1 and one for isp2but the out is one lan that connected to switch that carry the...
View ArticleGeneral • Re: RB5009, RouterOS 7.9.1, USB slot keeps changing
I can confirm it is still flapping after reboot.Tested on hAP ax3 with ROS 7.13.2 today.Statistics: Posted by RealQuaker — Fri Jan 19, 2024 11:27 pm
View ArticleWireless Networking • Re: Maximum MTU Size on virtual WiFi interfaces
I think you can use dst-address= as the LwIP-based controller instead – but I see if it fixes one. You likely can use interface or use a subnet /24 (or assign them IP with same /25 or smaller group of...
View ArticleGeneral • Re: hAP ac² multiple networks isolation problem
Awesome! The effort now will be worth it in the long run.Statistics: Posted by anav — Fri Jan 19, 2024 11:31 pm
View ArticleGeneral • Re: RB5009 directly connected to CRS310 pings timeout
As per the link, time to have a reread,you will see that the bridge should do no DHCP, and its all vlans!Therefore you create vlans for all your subnets and they have interface bridge.The vlans get ip...
View ArticleBeginner Basics • Re: two hotspot for two wan
A network diagram would be helpful to explain your network, not quite getting it..........Statistics: Posted by anav — Fri Jan 19, 2024 11:37 pm
View ArticleBeginner Basics • Internet and LAN Extender
Hi - I'm pretty new to Mikrotik, and spent quite a lot of time playing and researching this week. I've learned some stuff, but am stuck on a few bits.The plan is to receive the wifi broadcast from my...
View ArticleRouterBOARD hardware • Re: [SOLVED] Is it mandatory to mount antennas on hAP...
Questions from my side:why not use AX2 then ? A lot smaller and better performance then AC3.Why use a wireless router at all ?Well dear @holvoetn , I do use 2 hAP ax3 with antenna removed , in our...
View ArticleGeneral • Mikrotik ipv6 hotspot With Wan IPv4
Mikrotik ipv6 hotspot LAN-IPv6 to WAN-IPv4https://youtu.be/0dOPgkVlvCA?si=QowbbsUtuxesvWjLStatistics: Posted by abdrzjsy — Sat Jan 20, 2024 1:13 am
View Article