Beginner Basics • Re: VLANs seems not to isolate each other
Your firewall filter table has no "drop" rules. So of course nothing will be blocked. Please first study:https://help.mikrotik.com/docs/display/ ... d+Firewalland build filter rules from there, or...
View ArticleGeneral • loopback interface
helloHow can I create an interface with loopback type in Haplite AC router?Statistics: Posted by jacklandan — Tue Apr 02, 2024 8:29 am
View ArticleBeginner Basics • Re: MacOS Winbox issues
It does like switching from a dongle to wi-fi is sometimes flaky. What's odd is wine does deal with multiple interfaces, since I use ZeroTier with wine+winbox+Mac which does show all the discovery...
View ArticleGeneral • Re: Mikrotik MLAG HOWTO and Questions
7.14.2 and still unable to use bonding under ICCP/Peer_Port linkStatistics: Posted by khatsalano — Tue Apr 02, 2024 8:47 am
View ArticleWireless Networking • Re: RB941 searching for network
Thank you. When i changed mode on RB941 from B/G to B/G/N it connected to WiFi. Then i had problem because RB941 didn't want to get IP from DHCP. Then it got IP but i didn't get IP on my laptop that...
View ArticleWireless Networking • 802.11b required for me but missing in ROS7 WiFi
Hi.Iam recently updated my router, switch and a few of wAP ac to ROS7 (7.14.2). CAPsMAN was previously configured on ROS6, so, after migrating to ROS7 it is still functional, but on old drivers. I...
View ArticleWireless Networking • Re: 802.11b required for me but missing in ROS7 WiFi
You say yourself it supports B/G/N so apparantly the problem is not lack of 802.11bSo better rename the topic and include the wireless logs when the device attempts connectionStatistics: Posted by...
View ArticleGeneral • xz Backdoor CVE-2024-3094
Can someone confirm if MikroTik devices are vulnerable to the current SSH backdoor?See here https://openssf.org/blog/2024/03/30/xz- ... 2024-3094/.Althought the malware scans for .rpm or .deb packages...
View ArticleBeginner Basics • Re: How to configure LAN IP Pool
if you can help me with the configuration,commands that will be really helpfullStatistics: Posted by qadir52786 — Tue Apr 02, 2024 9:21 am
View ArticleGeneral • Problem with Mangle Rule
I setup load balance with my 2ISP both pppoe. But every time i enable the mangle rule for routing mark I cannot access my nvr and all cctv...Please help meStatistics: Posted by MrRey — Tue Apr 02,...
View ArticleGeneral • Re: xz Backdoor CVE-2024-3094
No, Mikrotik is not affected by this vulnerability.Statistics: Posted by Kanzler — Tue Apr 02, 2024 9:29 am
View ArticleRouterBOARD hardware • Re: CRS310-8G+2S+ with free flying heat sink
Question 2. Fan connector in the front of fan... it is weirdThat isn't a question.. What is weird about it? Standard 4-pin fan power connection. One pin is ground, one pin is power, one pin controls...
View ArticleGeneral • Re: Packet loss and RX Drops on 10G SFP+ X86_64
How did you solve the problem?Statistics: Posted by bodmas79 — Tue Apr 02, 2024 9:34 am
View ArticleGeneral • Re: [ask] how to check mac address on vlan CRS
sorry it seems that our question is incomplete, for CRS-like devices. If we create a new vlan, how to know if the vlan id we created is already read by CRS For example, some features from other...
View ArticleBeginner Basics • Re: Does "Detect Internet" actually do anything?
Does anyone have an idea how Mikrotik detect Internet judge WAN or LAN, please?My sfp1, sfp2, sfp3 are my WAN1, WAN2, WAN3 but sfp3 being detected as LAN...Capture.JPGStatistics: Posted by godel0914 —...
View ArticleForwarding Protocols • Re: Cannot established connection between two Virtual...
First of all, you are using NAT addresses out of range.The 192.168.0.0 is a B CIDR 16 address space.192.168.0.0 - 192.168.255.255 (192.168/16 prefix)And if you are not reaching the devices, with ping...
View ArticleRouterBOARD hardware • Re: CRS317-1G-16S+RM MPLS Support
Any progress in this front please or we just keep on dreaming?Statistics: Posted by loloski — Tue Apr 02, 2024 10:30 am
View ArticleGeneral • Re: [ask] how to check mac address on vlan
If you have bridge with vlan-filtering, then something likeCode: /interface/bridge/host/print where vid=<vlan id>where <vlan id> is VLAN ID you want to query.Another possibility (not sure...
View ArticleGeneral • Switch + Router all lights blinking
I have a L009 on RouterOS and a CSS326 on SwOS, and I experienced a (not easily reproducible) strange issue, where plugging in an ethernet lead for a trunk port I was setting up, caused all lights on...
View ArticleAnnouncements • Re: v7.15beta [testing] is released!
What's new in 7.15beta9 (2024-Mar-27 21:55):*) bgp - added initial vpnv6 support;*) bridge - added MVRP support;*) console - added "sanitize-names" property under "/console/settings" menu (option for...
View Article