Forwarding Protocols • Re: BGP ECMP (multipathing)
7.14.2 stable and still no bgp ECMP.Statistics: Posted by ivanflash84 — Sun Mar 31, 2024 12:33 am
View ArticleGeneral • Connectivity to customers mikrotiks via Wireguard. Good idea?
Hello to all,I am Looking for a easy and userfriendly support resp connectivity to my customers mikrotiks. To setup a ‘wg site to site’ connectivity from my to all customers mikrotiks would be an idea...
View ArticleScripting • Re: Future for posibility of moidular setings
Best you can do is use comments today. Those comments could be UUIDs if you wanted, but nothing automatic.Another technique is using functions that do wrap the ":if ([find name=ether1] do={ set...
View ArticleBeginner Basics • WAN and LAN passthrough to second MT - VLAN Question
I want to make available my router's WAN and LAN on a second router as well.I want to use a single vlan bridge for best performance.ETH1 is the WAN port, ETH3 is the trunk port to the next MT...
View ArticleBeginner Basics • Re: WAN and LAN passthrough to second MT - VLAN Question
To be clear you have a block of IPs from your provider and you want to use one for the first router and another for the second router??Statistics: Posted by anav — Sun Mar 31, 2024 1:11 am
View ArticleGeneral • Re: Connectivity to customers mikrotiks via Wireguard. Good idea?
Of course the WG tunnels would always be active.YOur work or home router would serve as the Server for handshake and all the client devices would have persistent keep alive set.You dont even need a...
View ArticleGeneral • Re: Problem with slow DHCP after migrating to Mikrotik switches
Of course not!The problem seems to be not having a concrete plan and understanding of the requirements before implementingNo idea of your topology, network diagram not provided. ( gives us a visual...
View ArticleScripting • Re: Convert C sample to KNOT script
Good day i am needing some help I have a bluetooth sensor that i have connected and whitelisted it to a MikroTik KNOT LR8 router Most of that is portable to RouterOS script. The tricker part is the...
View ArticleGeneral • NAT with several public IPs
Hi all, I have this scenario, I want to perfom a dst NAT, using another IP address different from the 192.0.2.2 configured on Ethernet WAN of Mikrotik, but I can´t make it work, performing an ARP...
View ArticleClik here to view.
SwOS • Re: No SwOS for CRS310-8G+2S+ ?
It seems that SWOS is now available for this model, i don't know how to install it however. If anyone knows how to install, please tell me Go to Upgrade tab.Then hit the button "Download and upgrade",...
View ArticleWireless Networking • configure "cAP ac" to...
I'm facing a challenge how to configure "cAP ac" to operate via CAPsMAN following any of available tutorials I could find.I don't want that cAP ac operates as a router (preferred to operate as AP of...
View ArticleBeginner Basics • Re: Fresh DHCP Client Test
I reset to default with no changes again (no quickset) and made only this change - assigning dhcp client to bridge:Code: /ip dhcp-clientadd comment=defconf interface=bridgeThe DHCP client does not get...
View ArticleRouterOS beta • Re: New User Manager in RouterOS v7
Almost a year later, we made a decision to completely phase out MT User Manager (ROSv7) from all our networks. While the software is generally stable, when it breaks it lacks any debugging facilities....
View ArticleRouterBOARD hardware • Re: Hex PoE to HAP AC boot fail - POE Overload issue
Since this is 1st result from Google I'm going to give some background: it will not work. The hAP ac resistance is too low per MT support (https://www.reddit.com/r/mikrotik/comme ... c/j3x8e1m/):The...
View ArticleGeneral • Forcing source ip and/or route
I'm not sure how to properly express this. I had a problem that I tried to solve with various combinations of src-nat and routing policy, failed, and then fixed it by doing it properly - which means...
View ArticleGeneral • Re: NAT with several public IPs
If the other WAN addresses are not router towards your NAT device[*], then you need to set those addresses explicitly on WAN interface. NAT only kicks into action after packet was already delivered to...
View ArticleWireless Networking • Re: Which bluetooth
I'd say that ROS only supports BT hardware vased on chipsets akso used by hardware made by Mikrotik. I could only find references to Quectel's BG77 in this context. So I guess that if you find a BT...
View ArticleBeginner Basics • MikroTik Fiber-to-Copper converter FTC11XG
Dear allI just received MikroTik Fiber-to-Copper converter FTC11XG and I spent more than three hours trying to figur out to configure it with DFP-34X-2C2 stick it is little bet complicated device at...
View ArticleSwOS • Re: Weird: Monitoring EGRESS traffic of a trunk port does not show...
Hello robertkjonesjr,thanks again for your detailed thoughts.In the beginning I indeed faced some additional challenges trying to monitor the switch on the same wire where also network traffic is...
View ArticleWireless Networking • Re: configure "cAP ac" to...
For one it very much depends on ROS version running on both devices. In addition it depends on which of optional packages are installed on cAP ac. After you provide this information, we can go...
View Article
