General • UPnP and Hairpin NAT
Hi there, I am having some trouble getting UPnP and Hairpin NAT to work together. Can you help?NAT is working for my web server with src-nat rule #0 in the config and dst-nat rule #2Hairpin NAT is...
View ArticleBeginner Basics • Re: my RB4011 is on v7.14 but firmware says 6.44.3
Thanks tangent & qatar2022,updated firmware too.Statistics: Posted by QuantumAalfa — Tue Mar 05, 2024 4:55 pm
View ArticleBeginner Basics • RB4011 updated v7.14 but log flooded with back-to-home info
Updated RB4011 to ROS v7.14 last night. Now, log flooded with back-to-home-vpn info - Handshake not completed.How to turn-off log of these errors.WG setup 5.jpgStatistics: Posted by QuantumAalfa — Tue...
View ArticleWireless Networking • Re: Using second ethernet port on CAP AX with VLANs...
You have to provision the wireless interfaces as static enabled, then you can add them to the bridge as required.Is it not possible to do dynamic provisioning + vlan-filtering on the bridge? I would...
View ArticleBeginner Basics • Re: ATL LTE18 unresponsive after initial setup worked
Why on earth do I need an account to contact official support?This Mikrotik stuff is quite a bit different business than usual ... ordinary people would definitely not have the patience for...
View ArticleGeneral • Re: IKEv2 no internet for client
Thanks for advice but adding /ip firewall filteradd chain=forward ipsec-policy=out,ipsec action=accept for outgoing traffic did not solved the issue. There were pakets passing thgought this rule but...
View ArticleContainers • Re: Mounted folder gets cleared when removing Container
I have the same issue on my hap ax^3 and external usb driveStatistics: Posted by vic3apex — Tue Mar 05, 2024 5:10 pm
View ArticleBeginner Basics • Re: Vlan for Voice
Presuming that the GrandStream can handle tagged VLAN traffic and based off my previous mistakes during your former topic, for which I apologize, I've come up with a hopefully working solution:1....
View ArticleGeneral • Re: Feature requests
Did you enable "advanced mode"? It does not provide those fields, but it provides some other useful features.Statistics: Posted by pe1chl — Tue Mar 05, 2024 5:27 pm
View ArticleAnnouncements • Re: v7.14 [stable] is released!
I have seen (in the past) photos of a "test lab" that they use to test new versions.The main problem is that they test mainly with "default config" so many other configs and features are not...
View ArticleGeneral • RouterOS v7.12.2
I have bought a couple of RB5009 routers and they came with RouterOS v7.8So I wanted to update them, but not to the "stable" version 7.14. I am using 7.12.1 on many routers and for now that is my...
View ArticleGeneral • Re: RouterOS v7.12.2
And yet ... it is mentioned on change log page.Statistics: Posted by holvoetn — Tue Mar 05, 2024 5:38 pm
View ArticleVirtualization • Re: CHR using Apple Virtualization Framework (via UTM)
I'm excited to see what people come up with now that the Ampere ISO is out. I tried messing around with it but I can't get things to boot.I tried on Equinox Metal, but couldn't get it work. I do not...
View ArticleGeneral • Re: Save RAM on RB941-2nD
Yes sure, for this model is recomended version 6, it can be used as AP for a capsman network, it's antenna is not convenient but for small environments and cheap budges it can have sense. Anyway the...
View ArticleWireless Networking • Re: Problems aiming nRAY
50 meters is too close to get any exact alignment without the most minute changes. Looks like you have achieved maximum throughput as is.MCS stands for Modulation Coding Scheme. Has to due with...
View ArticleGeneral • Re: WireGuard and Queues?
So I have found that I can configure mangle rules to mark connection and mark packet but no matter what I do I can't get that mangle to register with the simple queue rule that I have in place.What am...
View ArticleGeneral • How to assing a dynamic route to a routing table
Hi, I've an important task, the LAN network /24 is splitted in two parts, the first 127 addresses using the devault gateway with main routing table, the second half of the subnet should use another...
View ArticleWireless Networking • Problem creating Wi-Fi on hap ax lite LTE6
Hi,i have a little problem with Router OS 7.14 and hap ax lite LTE6.I want to set the Wi-Fi but when creating i encounter this error:https://imgur.com/a/RlECxiHwhy master is unknown? do i need to...
View ArticleBeginner Basics • Re: ipv6 issues with hEX S RB760iGS
So, you should include at least the line with the comment "defconf: accept DHCPv6-Client prefix delegation." in front of your drop-all input rule.ok, done that. In the web frontend, it appears under...
View ArticleClik here to view.
Wireless Networking • Re: Problem creating Wi-Fi on hap ax lite LTE6
And how was that device upgraded to 7.14 ?Certainly not the mainstream way of going to system / packages and then hit upgrade, I think.Educated guess:did you by any chance install wifi-qcom-ac package...
View Article