Beginner Basics • Re: CRS5 multiple vlans
If you don't want to tear bridge apart, then you can change properties of existing item using set command.I.e. if you haveCode: /interface/bridgeadd name=bridge/interface/bridge/portadd bridge=bridge...
View ArticleWireless Networking • Re: CAPsMAN & guest interface name
I have just solved it by adding the "dynamic" interface list to my bridge (instead of the guest interfaces directly).If you have any idea to fix the guest interfaces name though, I would be interested...
View ArticleRouterBOARD hardware • Re: Disc Lite5 ac is EOL......so what do we do?
sure, I would argue against the use of 'trust' though, that implies they are untrustworthy and I wouldn't want that to be the implication.A lot of users/operators don't report certain things when...
View ArticleBeginner Basics • Re: Assign ethernet port to existing VLAN
Working now. Here's my update:1) I studied the link provided by gigabyte091. This was helpful and led to 'port based VLAN on CRS125 examples' https://wiki.mikrotik.com/wiki/Manual:C ... Based_VLAN2)...
View ArticleScripting • Re: Script DHCP Lease to Simple Queues don't work since update to...
script is not working on 7.13.5anyway, is there any such script which works ?Statistics: Posted by metron6 — Tue Feb 27, 2024 8:08 pm
View ArticleGeneral • Re: Sudden lost of all admin passwords and admin users
Good AfeternoonThe same things are happening with my rb. I have a 4011 routerboard with the same problems. I have an open ticket with support number SUP-144744 awaiting a response, but so far I have...
View ArticleGeneral • Re: Slow speed through gre+ipsec tunnel
almost same problem on ccr2000/chr series V7.13any news/updates?Statistics: Posted by amirmahdi81 — Tue Feb 27, 2024 8:32 pm
View ArticleGeneral • Re: IKEv2 no internet for client
Thanks for advice. The passwords in the file are fakes. I have changed it before upload.Can you give me an examples of the rule which allows out ipsec traffic ?I would appreciate any...
View ArticleGeneral • Re: How to use fe80::1 (IPv6 Link-Local) via VRRP to provide...
I think you should use ULA (Unique Local Address) for this...https://en.wikipedia.org/wiki/Unique_local_addressNo, they serve a different purpose. ULAs are routable addresses and thus cannot be the...
View ArticleGeneral • ROS 7.13.5 - no more last handshake and traffic counters for wireguard
Hi!I am just setting up a new device with ROS 7.13.5Although Wireguard is working fine, there are not detailed informations for the peer about:- Last Handshake- RX- TXThe Wireguard interface is...
View ArticleWireless Networking • Re: Trunking Cube Pro
Thanks for all reply. As you said it wors pretty well and transfer all VLANS.But I have new issue. I test embeded bandwith test between two devices. Tested in receive, send and both mode. All of them...
View ArticleGeneral • Re: QinQ vlan bridge - help needed
Well, I've abandoned the idea and gone with /32 static routes and set proxy-arp on each vlan instead.Statistics: Posted by allegro — Wed Feb 28, 2024 12:50 pm
View ArticleGeneral • Re: RB5009 Power Issue
Everyone reporting the issue:have you made supout.rif right after the reboot (or use autosupout if it was generated) and made a ticket with support with supout included ?FWIW I don't see this issue on...
View ArticleRouterBOARD hardware • Re: RB4011 - Ports 1-5 Going down?
Hi! I have the same situation! Router: RB4011iGS-5HacQ2HnD.Sometimes all ports 1-5 goes down. Only after reboot they works normal.Maybe temperature is too high: Now i see 45C in system->health...
View ArticleScripting • Re: Change script to new time format
First of all, start by reformatting your ugly non readable one liner. You will never ever be able to see what is wrong in this mess.Code: :local dateint do={:local montharray (...
View ArticleBeginner Basics • L009UiGS-RM: Default route is not part of exported...
Hello everyone,when i export the configuration of my L009UiGS-RM (RouterOS Version is: 7.13.5) with command ‘/export’ or ‘/export verbose’ the default route to 0.0.0.0/0 is not listed.I would have...
View ArticleScripting • script for session time left and active user data usage
hello alli want script that show real session time left for hotspot user in status page and to save active usage data if any power shortagei have hotspot service if user login session time left for 1...
View ArticleGeneral • 7.13.5 capsman multiple radius depending on ssid not working
routeros 7.13.5 capsmancomplete capsman setup, working and running. have to use two different radius servers depending on ssid. found url https://help.mikrotik.com/docs/display/ROS/CAPsMAN and entered...
View ArticleWireless Networking • Configuring R11e-LTE for AT commands using Serial
How to properly set up the R11e-LTE modem in a MikroTik router to communicate via serial using AT commands, without relying on the at-chat tool? For example it can be configured for this modem...
View ArticleBeginner Basics • DNS Redirect Sanity Check
Hello, I'm configuring a NAT rule to redirect all the DNS traffic bypassing the Mikrotik gateway to the Mikrotik CHR itself:Code: 3 chain=dstnat action=dst-nat to-addresses=192.168.1.1 to-ports=53...
View Article