General • Re: VoIP over Wireguard Vpn: one way audio problem.
Wireguard has serious limitations. Wireguard only works well in ads. Most softphone programs VOIP don't work in Wireguard. SIP isn't working properly. Waste of time Wireguard is not suitable for SIP....
View ArticleGeneral • Assign ethernet port to existing VLAN
Currently I have several VLAns configured on my RB4011, and they work perfectly. My IOT network is on VLAN 30. Downstream I have a CSS326 switch. My IOT home assistant is on a Raspberry Pi plugged...
View ArticleClik here to view.
General • Wireguard Site-to-Site Route not working
Hello forum,I have set up a site-to-site VPN with Wireguard.Here are the facts:SITE A:- OPNsense Firewall- LAN IP network 192.168.1.0/24- Wireguard IP 10.13.37.1/24- Public IPv6- No public IPv4-...
View ArticleWireless Networking • Re: hAP AX3 slow SMB transfers with MacOS and Apple TV
Hey Guys, I was reading the previous comments and decided to upgrade to 7.14rc2. Unfortunately, after the upgrade, SMB is not working for me anymore.I tried to connect via MacOS and Windows, but it...
View ArticleClik here to view.
Beginner Basics • strange behavior of the system
strange behavior of the system, hangs. there is a main router from which everything is controlled, today it started showing strange logs and crashing, after a reboot it helped for a whileI'm a newbie,...
View ArticleBeginner Basics • IP/Route and IP/Adresses, the "Adddress List"
Working to copy the 2-router network described atCode: https://help.mikrotik.com/docs/display/ROS/IP+RoutingConnectivity is not what I expect: can't use Winbox from LAN 1 to reach Router 2; can't ping...
View ArticleBeginner Basics • how to make lr8 a wifi client
Hi all,Im a netwoking noob. I have a few lr8 gateways around, they are all connected directly to LAN interfaces and they are all working great. Now i have the chance to deploy one on a new roof but...
View ArticleGeneral • Re: IKEv2 no internet for client
Thanks for advice but it does not help. If I change it, it is still not working.The DNS 192.168.1.16 is fully functional DNS server with some additional local names.By my opinion there is some problem...
View ArticleRouterBOARD hardware • Intermittent 4OGbit Link on CRS326-24S+2Q+
Hi Everyone,Just picked up a CRS326-24S+2Q+ and I am struggling a little bit.I'm using it as a layer2 switch + VLAN's with no routing, so I opted to boot and use it in SwOS mode.I am using 3M Molex...
View ArticleBeginner Basics • Re: how to make lr8 a wifi client
It should not be harder than most other Mikrotiks (i.e. hard, but doable).You will need to connect via ethernet to configure it AND you must be VERY careful to not lock yourself out.Start...
View ArticleBeginner Basics • Re: strange behavior of the system
strange logs and crashingShowing logs might helpStatistics: Posted by IlKa — Thu Feb 22, 2024 8:04 pm
View ArticleScripting • Re: No-IP & DNSdynamic update
Amm0 Thank you it works. (But why ftp the name of this right?)Statistics: Posted by spamdog — Fri Feb 23, 2024 12:17 pm
View ArticleGeneral • Re: UDP faster than TCP - why?
That's not a Mikrotik issue...The main difference between TCP and UDP is that UDP is faster than TCP. UDP has a speed advantage because the user doesn't have to allow or acknowledge receipt of the...
View ArticleGeneral • RB5009 - problem with USB port
Hi all! Can u help me plz? On my router 5009 I accidentally deleted the usb port in system/ports.Now no usb modem works - LTE interface does not appear, but at the same time the modem is visible in...
View ArticleForwarding Protocols • ROSv7.13.3 - bgp-ext-communities
Hi All,Code: if (afi ipv4 && protocol bgp) { jump GLOBAL-DENY-v4; if (bgp-as-path ^123$) { set bgp-local-pref 200; } set bgp-communities TRANSIT; set bgp-ext-communities...
View ArticleWireless Networking • RB952Ui-5ac2nD Capsman
Hello,May I ask if is possible with firmware 7.13 manage the CAP_AX(cAPGi-5HaxD2HaxD) device from my working Capsman manager running on device (RB952Ui-5ac2nD). I distributing caps option vis dhcp....
View ArticleForwarding Protocols • Re: ROSv7.13.3 - bgp-ext-communities
Code: [admin@MikroTik] /routing/filter/community-ext-list> add list=yes communities="rt:123:123" [admin@MikroTik] /routing/filter/community-ext-list> add list=yes...
View ArticleBeginner Basics • Re: IP/Route and IP/Adresses, the "Adddress List"
Firstly, you don't need to have the LAN subnets of Router2 in the address list of Router1, you should remove them. Secondly, I don't see any 10.10.10.0 subnet that should be pingable. Thirdly, indeed...
View ArticleClik here to view.
General • Re: MLAG hopelessly broken?
Easy. Don't use mikrotik!What else then?EDIT:i just gave you alternatives RIGHT above your post if you are on a budget ... fs.com S5850 or N5860. i would recommend the Ndefinitely heavier on the price...
View ArticleGeneral • MikroTik hex S + ONT Zyxel PMG3000-D20B
Hi all!I decided to replace the GPON operator terminal with my own one.I purchased a MikroTik hex S and a GPON Stick Zyxel PMG3000-D20B for it. I installed SN from the “operator” terminal on the...
View Article